News Archive
The intelligent UPS for industrial applications
IQ technology makes the QUINT UPS-IQ an intelligent UPS. Take a look at our short tutorials to find out how you can use the full potential of IQ technology with the UPS-CONF software.
Highest system availability with QUINT ORING redundancy modules
Double the service life of redundantly operating power supply units with Auto Current Balancing Technology (ACB).
Easy planning, quick servicing - the universal isolation amplifier
1,600 signal combinations can be set quickly: It is easy and convenient to set the suitable signal range for inputs and outputs using the DIP switch on the front side. Without PC and software, even when the device is installed.
Trusted Wireless Ethernet (TWE)
Industrial wireless Ethernet products from Phoenix Contact provide you reliable transmission of your Ethernet driven system.
Operating industrial PCs in a fail-safe manner
Thus, industrial PCs continue to work reliably even in the case of a power supply network failure: with the uninterruptible power supply TRIO USV, which combines the power supply unit and the electronic switchover unit in one housing.
SMS relay for simple monitoring, alarm generation and remote switching via the GSM mobile network
PSI-MODEM-SMS-REL is a compact remote control and signaling system. Six analog or digital inputs and four relay outputs with PDT contacts are monitored and controlled through SMS communication at every location through the GSM mobile network.
How WirelessHART® uses industrial wireless technology
WirelessHART technology uses HART7 to make the HART protocol more usable, flexible and cost effective. Network your HART devices to the wireless sensor netowrk and reduce deployment time and complexity using industrial wireless connectivity.
Compact timer relay with only 6.2 mm design width
The new compact timer relays make room in the control cabinet.With a design width of only 6.2 mm, it is possible to save up to 70% more space compared to conventional timer relays.
One switching device for all safety functions - PSR-TRISAFE
The universal, easy-to-configure solution for the monitoring of all safety installations such as emergency stop, safety doors, two-hand control devices and light grids. Twenty inputs and four outputs offer maximum flexibility in a compact width 67.5mm.
CONTACTRON reversing solid-state contactor circuit
Safe starting, reversing, protecting and switching of motors up to 4 kW in a 22.5 mm narrow housing.
Licensed Data Wireless Radios
The RAD-UHF-... data radio products are designed to provide complete system solutions for wireless data communications in a variety of industries and applications.
INTERFACE safety relays – Plug & Play in safety engineering
In addition to the familiar approvals for mechanical and plant engineering, many of the modules are certified in acc. with IEC 61508 / SIL3 for process engineering and in acc. with GL (Germanic Lloyd) for shipbuilding in particular.
Current and Voltage Transducer
Introducing the new current or voltage measuring transducers with the Rogowski coil that can be opened to allow the user to retrofit the modules in an existing system without interrupting the circuit.
The Power Professionals for use worldwide
Protect your equipment against the consequences of mains interruptions with the uninterruptible QUINT DC-UPS, a pure bundle of power.
VARIOFACE system cabling
In order to be able to wire process controllers fast, clearly and fault-free, Phoenix Contact system cabling now has matching connection solutions for the process I/O systems DeltaV from Emerson and S800 I/O from ABB.
Electronic Load Relay for Parameterizable Soft Startup
Now with parameterizable soft startup for asynchronous machines up to approx. 4 kW.
Compact monitoring modules
... provide you with current, voltage, temperature monitoring, as well as 3-phase and directional monitoring in a particularly slim design.
PSR safety relay – Utmost safety
A new module with safe, slow-release contacts has been added to the PSR safety relay product family
PSR safety relay – Utmost safety
A new module with safe, slow-release contacts has been added to the PSR safety relay product family
VARIOFACE system cabling for SIMATIC S7 – Plug it in and go!
The system concept of INTERFACE system cabling reduces manufacturing costs through fast, faultless and uniform wiring of the input and output modules.
RS-232 / 485 meets Ethernet
Simple integration of serial interfaces in industrial 10/100 Base-T(X) networks.
VARIOFACE system cabling for Emerson DeltaV
The DeltaV system allows you to install the process wiring via "mass termination blocks" using flat-ribbon cable plug connectors. Phoenix Contact implements made-to-measure wiring with the product line INTERFACE Cabling.Power for all
The QUINT POWER universal power supply convinces with new products with its normal high quality, e.g. the single-phase 24 V power supply unit with 40 A output current
INTERFACE Ex - NAMUR isolation amplifier meets the SIL 2 requirements
Phoenix Contact expands its range of products for safety-related applications with 2 more modules: The isolation amplifiers have corresponded to the SIL 2 requirements since the year of manufacture 2005.
Motor Management - For all services along the Profibus
Motor Management from Phoenix Contact allows you to switch, measure, warn, protect, monitor and evaluate.
INTERFACE Wireless
With the new RAD-ISM-2400-SET-UD, radio system, analog and digital sensor signals can be received and transmitted safely.
System Cabling for the Inline Automation System
Wiring is considerably reduced and takes just a few steps.
MINI Analog – New standards in the 6 mm class
Measuring temperatures, converting or isolating signals – no problem with the new analog range from Phoenix Contact.
Bluetooth(TM) wireless communication
Serial data transmission via Bluetooth.
INTERFACE Wireless
With the new RAD-ISM-2400-SET-UD, radio system, analog and digital sensor signals can be received and transmitted safely.RS-232 / 485 meets Ethernet
Simple integration of serial interfaces in industrial 10/100 Base-T(X) networks.
Worldwide system/machine remote monitoring and alarm
The GSM modem PSI-GSM/GPRS-MODEM/RS232 and the V.34 modem PSI-DATA/FAXMODEM/RS232 have been specially tailored to the industrial requirements of remote maintenance and alarm messaging.MINI Analog – New standards in the 6 mm class
Measuring temperatures, converting or isolating signals – no problem with the new analog range from Phoenix Contact.
PLC Relay is the perfect interface between control and system peripherals
PLC RELAY from Phoenix Contact is the most complete and innovative coupling relay family in the market.
POWER SUPPLY uninterruptible power supply units
Just "buffer" away mains interruptions or failures – for anything from a few milliseconds to several hours.
Fiber optic networking – PSI-MOS
And as to ranges, high-performance FO interfaces open up new dimensions while still using the simplest of connection technology with polymer, HCS and glass fiber.Wireless communication with Trusted Wireless I/O and BluetoothTM
Wherever analog and digital I/O signals need to be transmitted over distances of several kilometers, Trusted Wireless is exactly the right technology.MINI ANALOG
Measuring temperatures, converting or isolating signals – no problem with the new analog range from Phoenix Contact.PSR speed monitor
New 45 mm slim PSR modules comfortably monitor drives up to safety category 4/EN 954-1 and SIL 3 – without any extra device hardware.
INTERFACE UPDATE Q1 2010
Find out about the several new parts added to Phoenix Contact's lines of Power Supply, Relay and Analogue Signal Conditioners. Read about the new ratings on the STEP Power Supply line.More News